Tactile Paving

Defiance Tactile Paving

The Defiance Hazard Warning Profile has been
designed to comply with full Disability Discrimination
Act (DDA) 2004 and as illustrated offers the
following benefits;
Using the specially formulated two part adhesive
enables the tile to adhere to virtually any surface ie:
Concrete, Terrazzo, Marble and Ceramic.
No excavation was required, particularly crucial at
sites where DDA compliance is an issue.
Quick and clean installation means that these
projects were carried out with the minimum of
disruption in a cost effective manner.
Skid Resistance Value (SRV) tested and found to out
perform anti skid surfaces. (Details available on
request)
Size: 400mm x 400mm

Defiance Tactile Paving

The Defiance Blister Surface is available as red for
controlled crossings and buff for uncontrolled
crossings. In both 400 x 400mm and 450 x 450mm
sizes and as illustrated in the images offers the
following benefits:-
• No heavy duty plant was used
• No excavation was required
• Both these crossings were completed in less than
2 hours, keeping pedestrian and traffic
management to a minimum
• No cracking - No more trip hazard claims
• Hard wearing - 7 times more durable than
concrete
• Skid resistance value (SRV) tested and found to
be higher than concrete
• Ultra Violet (UV) tested for colour fade
• Specially formulated adhesive, which bonds to
most surfaces
• Freeze thaw tested (details available on request)

Defiance Tactile Paving

As illustrated in the image Defiance Segregated
Shared Cycle Profile has been fitted to an existing
footway without the need for excavation thus
minimising disruption and labour costs.
Size: 400mm x 400mm

DEFIANCE SEGREGATED SHARED CYCLE TRACK/ FOOTWAY

As illustrated in the image Defiance Segregated
Shared Cycle Profile has been fitted to an existing
footway without the need for excavation thus
minimising disruption and labour costs.
Size: 400mm x 400mm

DEFIANCE GUIDANCE PATH SURFACE

As illustrated defiance guidance path profile can be
fitted to virtually any surface for quick and easy DDA
compliance. Size: 400mm x 400mm

DEFIANCE OFF STREET PLATFORM EDGE WARNING SYSTEM

The Defiance Off Street/Platform Edge profile has
been designed to cater for the growing demands of
DDA compliance within the rail network.
It has been widely adopted and approved
throughout the network as it offers:-
Quick Installation - 120 linear meters in 4 hours
No excavation - Most stations do not have access
for heavy plant - No noise issues.
Adheres to most surfaces i.e. Ceramic, Marble,
Concrete, Tarmac and Bitumen.
• Quick Curing
• No mess
• No lifting equipment required
• Harder wearing than concrete
• SRV tested
• Professional installation available
Size: 400mm x 400mm

TWO PART ADHESIVE

Size: 5kg* (Not shown)

TWO PART ADHESIVE MOISTURE TOLERANT

Allows installation in damp/moist conditions.
Size: 5kg*