Concrete Blade
This range of diamond cutting blades is based on
state-of-the-art technological developments which
offer the lowest cost per cut and therefore best value
for money.
All Defiance diamond blades are manufactured in the EU to EN13236 and OSA standards.
Size: 230mm x 22.2mm
Concrete Floor Blade
This range of diamond cutting blades is based on
state-of-the-art technological developments which
offer the lowest cost per cut and therefore best value
for money.
All Defiance diamond blades are manufactured in the EU to EN13236 and OSA standards.
Size: 300mm x 20mm
Asphalt Blade
This range of diamond cutting blades is based on
state-of-the-art technological developments which
offer the lowest cost per cut and therefore best value
for money.
All Defiance diamond blades are manufactured in the EU to EN13236 and OSA standards.
Size: 300mm x 20mm
Abrasive Blade
This range of diamond cutting blades is based on
state-of-the-art technological developments which
offer the lowest cost per cut and therefore best value
for money.
All Defiance diamond blades are manufactured in the EU to EN13236 and OSA standards.
Size: 300mm x 20mm
K750 350mm Portable Cut Off Saw
An entirely new generation of cutter is born. The
K750 has been redeveloped from the bottom up,
inside and out. The new, exclusive motor technology,
DualCharge, provides an extremely powerful motor
producing 3.7kW with low emissions and impressive
fuel economy.
Defiance 2 Stroke Oil
This 2 stroke oil from Defiance is packaged in convenient 100ml packs which will treat 5 litres of
petrol at a 50:1 mix.
Ideal for use in the K750 cut off saw.
Size: 100ml
Stone Cutting Discs
Dronco Stone Cutting Discs are suitable for cutting
all types of material found on the construction site,
such as concrete, stone, floor tiles and sand-lime
stone. This range of discs are manufactured to the
highest quality and produced to EN12413 and VBG49 Standards.
Size: 4"" x 1/8"" x 5/8"" (100mm x 3mm x 16mm)
Metal Cutting Discs
This all-purpose range of flat cutting discs is suitable
for cutting all types of metal and are manufactured
to the highest quality providing optimum
performance produced to EN12413 and VBG49
standards.
Size: 4"" x 1/8"" x 5/8"" (100mm x 3mm x 16mm)
Dronco Rail Cutting Discs
Premium Rail Cutting Disc
AZ 30T “BAHN” - BF
Premium quality zirconium rail cutting discs certified
by Network Rail produced to EN12413 standard.
Size: Size: 356mm x 4mm x 25.4mm (14"" x 5/32"" x 1"")
Ductile/Asphalt Cutting Disc
Specifically designed for cutting cast/cement
composition ductile pipes but also gives excellent
results in asphalt. Can also be used on earthenware
pipes, roof tiles and sand/lime stone. Size 300mm
dia x 4mm x 20mm bore.
Dronco Multipack 115mm Diameter
Containing: 1 x Diamond Blade, 1 x Zirconium Flap
Disc, 1 x 6mm Metal Grinding Wheel, 1 x 3mm
Stone Cutting Wheel, 1 x 3mm Metal Cutting Wheel.
Dronco Multipack 230mm Diameter
Containing: 1 x Diamond Blade, 3 x Metal Cutting
Wheels, 1 x Stone Cutting Wheel.
Dronco Multipack 125mm Diameter
Containing: 1 x Diamond Blade, 1 x Zirconium Flap
Disc, 1 x 6mm Metal Grinding Wheel, 1 x 3mm
Stone Cutting Wheel, 1 x 3mm Metal Cutting Wheel.
Dronco Multipack 300mm Diameter
Containing: 1 x Diamond Blade, 3 x Metal Cutting
Wheels, 1 x Stone Cutting Wheel.
Rubbing Bricks Plain
200mm x 50mm x 50mm Medium Grit. Most
commonly used to clean or dress floor tiles and
concrete floors. Available in plain or fluted.
Rubbing Bricks Fluted
200mm x 50mm x 50mm Medium Grit. Most
commonly used to clean or dress floor tiles and
concrete floors. Available in plain or fluted.